Laser Cutting Workpiece Inspection
Precise and thorough quality inspection to ensure the highest standard of metal parts from laser cutting.
.png)
.png)
.png)
.png)
1. Verify Material Type and Thickness
Confirm that the material matches the specification (Steel, Stainless Steel, Aluminum).
2. Surface Condition Check
Ensure the surface is free from scratches, rust, or dents.
3. Quantity Verification
Confirm that the number of pieces matches the Production Order.
4. Edge Quality Check
Edges must be smooth, clean, and without burrs or jagged marks.
5. Hole and Cut Accuracy
Check that all cut holes are to design dimension and not deformed.
6. Dimensional Verification
Measure overall length, width, and hole spacing according to the drawing.
Vernier Caliper
Tape Measure99.8%
QC Pass Rate
Factory Report Data
| Inspection Item | Acceptance Criteria |
|---|---|
| Production Quantity | Matches Production Order |
| Edge Quality | No Burrs / Smooth Finish |
| Hole Dimension | Within Drawing Tolerance (±) |
| Overall Dimension | Within Specified Range |
| Material Type & Thickness | As per Specification |